WatchUSeek Watch Forums banner
6498
1-20 of 38 Results
  1. Watches - Private Sellers and Sponsors
    Sold: Stowa Flieger 41mm 6498 Handwound Sold *** Asking $925 OBRO *** Sold Excellent shape. Original owner. Bought this from Stowa May 2016. Few light marks from normal wear. Comes with mint black leather old style strap, boxes, warranty card, and papers. Case: 41mm, Stainless steel, fine...
  2. Watches - Dealers and Manufacturers
    FS: Eberhard & Co. Traversetolo manual wind Unitas 6498, reference 21016. Very good overall without box or papers. Ships fast and free. More details and actual pics here
  3. Jörg Schauer & STOWA
    Hello, I'm planning to buy my first Stowa, and decided to go for one of the 90th anniversary editions. Based on their English news page, they'll be making both 6497 and 6498. I think I'm leaning towards the 6497 but I can't seem to find any real or concept photos. Not sure if they've ever made...
  4. WTB - Wanted to Buy
    Any Stowa Flieger 6498 41mm (no second hand) watches out there? Motivated buyer. Withdrawn: bought a new one.
  5. Watches - Private Sellers and Sponsors
    SOLD. Up for sale is my Tisell 157 handwound watch with upgraded sapphire crystal, white enamel dial, blued hands, small seconds display, Asian 6498 (Seagull 3621) movement with a 40-hour power reserve, and exhibition caseback. This watch was made in South Korea, has a 22mm leather strap, and...
  6. ...

    Watches - Private Sellers and Sponsors
    relisted
  7. ...

    Watches - Private Sellers and Sponsors
    relisted
  8. WTB - Wanted to Buy
    Hi, everyone-- I'm looking for a Parnis pilot with the 6498 movement, 44mm, black face (I'm not too fussy about the strap). I'd prefer not to wait weeks for it to show up from one of the HK or China sellers and I'm hoping someone on here has one that can use a new home :-) and is in good...
  9. eBay Auctions
    ETA 6498 Custom Wristwatch with Vintage Hamilton Dial | eBay
  10. Watches - Private Sellers and Sponsors
    SOLD - $725 $900 $850 $825 $800 $775total cost to you. I will take care of PayPal fees and cost of shipping to anywhere in the Contiguous United States (48 states)(CONUS). The package will be insured and your signature will be required upon delivery. For sale (no trades) is my Lum-Tec M21...
  11. Public Forum
    6497s and 6498s don't officially hack (the fourth wheel, and by association the subseconds hand doesn't stop turning when the crown is pulled to the setting position, which makes syncing the seconds hand almost impossible). It has been reported that one can fake a hacking behavior by putting...
  12. Watchmaking
    This watch started with the gorgeous antique dial, which I got off Ebay. It is a little unconventional (about .5mm wider in diameter than most 6497/6498 dials and the subseconds hole is 10mm from the center hole where as the 6497/6498 prefers 10.25). I could have dealt with the first problem...
  13. Watches - Private Sellers and Sponsors
    ** Price reduced** Hi all, Up for sale are two custom built pilot watches that have been hand assembled by myself. I've recently been making these for friends and family but this time around I decided to build an extra 2 and see if anyone is interested in them. I have one Type A and one Type...
  14. Watchmaking
    Okay, so I've got a few movements and cases (and other stuff, hands, etc.). I'm a little unsure how the whole stem business works. I understand "how" to remove the stem that came with the movement via the stem screw. What I'm unsure about is whether I am intended to use the stem that came...
  15. Watchmaking
    I finally got all the pieces for my first 6498 build. It comes with a few separate pieces: two mounting brackets, two mounting screws, the hour wheel, and the hour wheel compression spring. Simple question: does it matter which way I orient the spring? Which of the convex or concave side...
  16. Chinese Mechanical watches
    In my perusal of affordable (aka super cheap) 6497 and 6498 movements I have found quite a few 6498s (all the exact same movement I believe) with adjustable mass balances. The don't appear to be thermally adjusted (the balance isn't split into two halves), but they clearly have a set of...
  17. Watchmaking
    In my perusal of affordable (aka super cheap) 6497 and 6498 movements I have found quite a few 6498s (all the exact same movement I believe) with adjustable mass balances. The don't appear to be thermally adjusted (the balance isn't split into two halves), but they clearly have a set of...
  18. Watchmaking
    I just bought a very nice dial (hasn't even arrived yet) and I'd like to determine whether a 6498 will fit it. I can measure the pinion distance when it arrives, but I don't have a 6498 lying around to measure. I have a watch with a 6497 in it that I can sort of measure through the crystal...
  19. Watchmaking
    Some movements are quite common yet extremely diverse (e.g. Unitas/ETA 6497/6498). You can buy numerous dials as parts of DIY projects. What I'm unsure about is the placement of the dial mounting pins. Are all movements of a given model (say, 6497) guaranteed to have mounting holes in the...
  20. Public Forum
    hey, after i finished my second skeleton watch i wanted to show it here. my first watch was weapon industry themed ( https://www.watchuseek.com/f6/tg01-skeleton-watch-project-645142.html ) and this one, as the title says, is coal mining themed. what i wanted to achieve in this watch are sights...
1-20 of 38 Results
Top