WatchUSeek Watch Forums banner
1 - 13 of 13 Posts

· Registered
Joined
·
258 Posts
Discussion Starter · #1 · (Edited)
Hi guys,

Second time posting here. instead of asking more questions I thought it was about time I gave something back.

Here is the omega pocketwatch I was given a few weeks ago. It belonged to my great grandfather who was a captain in the british army in WWI, accompanying him at the battle of the somme as well as others during his time of military service.

The movement itself is dated to 1903 and is a 19''HN - considered to be the first movement and the very keystone of the omega company. unfortunately however, the case is from 1913 and was a replacement after the original one was damaged; it is plated brass and has a screw down bezel and hinged movement mount.

The dial itself is in very good condition with no cracks or blemishes and the hands are rose gold.

Pocket watch Watch Clock Gear Analog watch






Watch Pocket watch Fashion accessory Analog watch Stopwatch


Hazchrono
 

· Registered
Joined
·
20,245 Posts
You have to attach them if they are on your hard drive. Otherwise you have to upload them to a photo hosting site like Photobucket.com and then use the forum software. Obviously we cannot read links to files on your PC or you are really in trouble.
Use the Manage Attachments button in the Advanced Settings.
 

Attachments

· Registered
Joined
·
20,245 Posts
It looks to be in great condition and is a very high grade watch with an interesting family history. This is a wonderful candidate for servicing and restoration to keep for future generations.
 

· Registered
Joined
·
2,076 Posts
Here is the omega pocketwatch I was given a few weeks ago. It belonged to my great grandfather who was a captain in the british army in WWI
As others have said, this is a very fine watch, with a high-grade caliber. The regulator attests to that, as also does the jewelling (how many jewels?), some of which are set in gold "chatons" screwed to the plate.

I suggest you should NOT try to check the timekeeping before having the watch serviced, cleaned and oiled. After so many years, the oil has no doubt set or dried, and it would not be wise to let the watch "run dry".

Also, it is a very good idea to keep the chain on the watch in order to avoid dropping it, and ruining the dial... or worse. These do not have "shock protection"!

This is a very fine timepiece and a great heirloom, very much worth restoring. You're lucky!
 

· Registered
Joined
·
1,989 Posts
A very nice watch. I agree with Francois, timing the watch without first having it serviced would be pretty pointless, since the watch isn't running in its best possible condition at the moment.

Have the watch cleaned, checked and serviced by a qualified watchmaker. Usually the watchmaker will do a rough time-check of the watch as well, but timing is something you can also do yourself.
 

· Registered
Joined
·
157 Posts
I suggest you should NOT try to check the timekeeping before having the watch serviced, cleaned and oiled. After so many years, the oil has no doubt set or dried, and it would not be wise to let the watch "run dry".
The watch was serviced about a week ago, I went with HazChrono to have it done. :-!
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top