Selling this in the parts section since this will probably be disassembled and used as parts, I am guessing.
This watch started out as an Arethusa World Diver in instrument black. I didn't really care for the handset so I thought I would make it into something else. The circular handset was already rubbing on the dial and was very flimsy and did not come off clean. The dial got marked up in the process so both were discarded and are not included here.
The Seiko NH35 movement is running beautifully except that the date at 6 o'clock won't change over during time keeping (it turns over fine in the second crown, quick set, position). The aftermarket sterile green dial and handset have a few light marks on them, but it is keeping time well after installation.
The case is 40mm by 48mm by 14.7mm (with the domed sapphire). Full length tapered bracelet (20-18mm) with screw links and 6 micro-adjust holes. The clear dial spacer doesn't quite fit right between the dial and case, but it is close. The crown screws down and pops out fine. Bezel action is on the lighter side with some back play.
Wear it as is or take it apart and make something of this, but I am moving on to other projects. Comes with what you see in the pics. Plenty of feedback available for me with a quick search.
$70 obo. US sale only.
![Watch Analog watch Clock Font Rectangle]()
![Watch Analog watch Clock Rectangle Watch accessory]()
![Watch Vehicle Automotive design Automotive exterior Motor vehicle]()
![Watch Analog watch Clock Watch accessory Rectangle]()
![Watch Analog watch Clock Watch accessory Rectangle]()
![Natural material Font Soil Fashion accessory Landscape]()
![Watch Analog watch Clock Nickel Watch accessory]()
![Font Circle Wood Soil Rock]()
![Watch Analog watch Silver Clock Rectangle]()
![Watch Gadget Font Medical equipment Material property]()
This watch started out as an Arethusa World Diver in instrument black. I didn't really care for the handset so I thought I would make it into something else. The circular handset was already rubbing on the dial and was very flimsy and did not come off clean. The dial got marked up in the process so both were discarded and are not included here.
The Seiko NH35 movement is running beautifully except that the date at 6 o'clock won't change over during time keeping (it turns over fine in the second crown, quick set, position). The aftermarket sterile green dial and handset have a few light marks on them, but it is keeping time well after installation.
The case is 40mm by 48mm by 14.7mm (with the domed sapphire). Full length tapered bracelet (20-18mm) with screw links and 6 micro-adjust holes. The clear dial spacer doesn't quite fit right between the dial and case, but it is close. The crown screws down and pops out fine. Bezel action is on the lighter side with some back play.
Wear it as is or take it apart and make something of this, but I am moving on to other projects. Comes with what you see in the pics. Plenty of feedback available for me with a quick search.
$70 obo. US sale only.
