WatchUSeek Watch Forums banner
  • Take part in a short activity and share your valuable opinion on new design concepts for AVSForum! >>> Click Here

7002 Gasket Question

5798 Views 9 Replies 6 Participants Last post by  El @
Hey guys,

Could anyone help me find a complete gasket set (crystal, bezel, case back, and crown) for a Seiko 7002 diver? I would like to get all the seals replaced and have the watch's water resistance tested.

If they are not available as a set, where would be the best place to by them individually?

  • Like
Reactions: 1
1 - 1 of 10 Posts
You can use generic 32mm crystal "I" gaskets and several of eBay sellers should have the 7002 and 6309 bezel gaskets.

I'm too lazy to measure, but measure the case opening for the 7002 crystal. Subtract 32mm from that, then divide that number by two.

You'll have the gasket thickness to order when looking for a generic 32mm crystal gasket. Sometimes the gaskets are listed by ID and OD. ID is 32mm and the OD is the case opening.

Borel, Ofrei and Esslinger should sell them.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.