WatchUSeek Watch Forums banner

1 - 2 of 2 Posts

2,601 Posts
Discussion Starter · #1 · (Edited)
SOLD my Precisita PRS-14. If you're reading this, you probably already know what it is, long sold out, very sought after. This one will come as watch head only, I doubt anyone wants a used strap in these times. Here's part of Precista's write up regarding this piece:

**The most significant improvement is the addition of an anti-magnetic movement cover, movement holder and soft iron dial giving the watch anti-magnetic resistance to 80,000 A/m (Amp metres), the same as modern day IWC and Sinn watches. This has increased the thickness of the watch by 3mm over the original.


Solid stainless steel case with brushed steel sides, polished top and back. Unidirectional bezel with luminous numbers in the bezel insert sealed with hardened acrylic. Screw back and screw down crown; the crown assembly is identical to that employed in the "Dreadnought" and has been tested to 2000 metres. Domed acrylic crystal in keeping with the original design. The dial is soft iron anti-magnetic and the polished steel sword hands are filled with Super Luminova, as are the indices.

Each watch has its own unique serial number, which also identifies the date of manufacture, engraved on the case back.


40mm diameter across the bezel and 46.6mm to the tip of the signed crown. 47mm lug tip to lug tip and 14.3mm thick to the top of the domed crystal. Lug spacing is 20mm and the watch head without strap weighs 90 grammes.


ETA 25 jewel automatic, calibre 2824-2 (standard).**

Priced at $600, shipped in the US.

Sent from my SM-N950U using Tapatalk
1 - 2 of 2 Posts