WatchUSeek Watch Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,789 Posts
Yesterday I switched modules between GMW-B5000 and GW-B5600. The alarms and beeps sound exactly as before I switched them. So GW-B5600 is much louder than GMW-B5000, even with modules switched.
The speakers are in the modules, correct? The steel case really seems to be the "issue".
You could always test them with the modules out of the case too.
 

·
Registered
Joined
·
1,789 Posts
I could be wrong but I believe speaker is attached to the caseback (small flat circle) where it recieve electricity power via alarm spring. That's why when testing buttons without closing the caseback you can hear nothing.
These new modules don't have an alarm spring on the back like some of the old ones. At least not one I know about, and I've taken them pretty far apart!

Here's the backside of the module:


Some other views:




 
1 - 2 of 2 Posts
Top