I'm sure that some mathematician has worked this out before but I worked out the following ratio system for assessing the appropriate size for a watch on a wrist.
Its pretty simple
1/ Convert wrist size into mm
2/ Divide total wrist size in mm by the size of the watch
eg A 7 inch wrist and a 38 mm watch = 178mm divided by 38mm= Ratio of 4.7
This brings me to the controversial part. What is an acceptable ratio? I think using this formula, that an acceptable ratio falls between 4.0 and 5.0. Anything below 4.0 is too big and anything above 5 is too small.
Here is an example using a 44mm watch which should be too big for some with smaller wrists
6.5 inch ( 165 mm) Ratio=3.75 Too big
7.0 inch (178mm) Ratio=4.0 Just ok- acceptable
8.0 inch (203 mm) Ratio=4.6 Great fit
This brings me to interesting observation that wearing a 39 mm watch on a 7 inch wrist has a a very similar Ratio as wearing a 44mm watch on an 8 inch wrist. That is, a ratio of about 4.6.
For reference, here are the conversions for wrist size
6 inch = 152.5 mm
6.5inch = 165mm
7inch = 178mm
7.5inch= 190.5mm
8.0inch = 203mm
8.5 inch = 216mm
I realize I am opening myself up to ridicule for being too analytical but I think it's a pretty useful way to work out a rough guide and obviously does not take into account lug shape etc. What do you think? Has someone worked this out before? Have I got too much time on my hands? Can this concept be improved on?
Makes sense to me. Let's assume the human wrist is approximately an ellipse with major axis say twice the minor axis (ie twice as wide as thick.)Then assume that the watch diameter is approx the same as the width of the wrist (major axis). Then if you work out the circumference of the ellipse you'll find that the ratio of circumference to major axis is approx. 5. You'd probably want the ratio to be less than that as you don't want the watch to overhang your wrist.
With this premise, the ratio should be about 1.58*pi = 4.96... but as you have noted, you probably want the ratio to be a bit smaller so that the watch doesn't overhang, so probably about 4.5 is ideal.
i was just in the shower where i do all my best thinking and it dawned on me that dividing the total wrist by the ratios 4 and 5 gives you a minimum and maximum ! You just beat me to pointing that out!
eg 7 inch (178mm) gives me a minimum of 35.6mm and a maximum of 44.5 mm
I think you can impose certain conditions to account for various watch styles.
1. Dive watches should use bezel diameter should be used instead of case diameter. Some divers have tapered cases so a 44mm Oris Diver wears like a 40mm due to the 40mm bezel.
2. Cushion cased watches should use vertical case length rather than the formal 4 to 10 measurement for case diameter.
According to the theory your range is from 38 to 47.5mm. If you show me a wrist shot of you with a 50mm watch and it looks like it fits, id be happy to to proved wrong. ;-) But you wear what you like, this is just a guide.
Lug to lug length also pays a crucial role, some watches have long lugs and tend to hang or occupy the whole wrist without necessarily being attached to a large diameter case. A refined algorithm should take into the account even the angle of the lugs.
Also, as a European and software developer thinking with an analytical mind most of the time, I chuckled a bit when I saw this thread:-d
Lug to lug length also pays a crucial role, some watches have long lugs and tend to hang or occupy the whole wrist without necessarily being attached to a large diameter case. A refined algorithm should take into the account even the angle of the lugs.
Also, as a European and software developer thinking with an analytical mind most of the time, I chuckled a bit when I saw this thread:-d
1. Put it on.
2. Look at it from different angles, including in mirror.(angles, mathematical?)
3. Do you like it?
4. What will others say?
5. Bugger them.
6. Buy it.
7. Enjoy it.
Read the children's book "Stephanie's Ponytail" by Robert Munsch and apply that philosophy to buying and wearing watches, or anything else for that matter.
Read the children's book "Stephanie's Ponytail" by Robert Munsch and apply that philosophy to buying and wearing watches, or anything else for that matter.
I'm wearing a 44mm watch right now with only a 6.5" wrist. That gives me a ratio of 3.75, which should be too big according to your theory. I'd say the watch just about fits (no hanging lugs either). Judge for yourself.
(slightly blurry pic)
I'm wearing a 44mm watch right now with only a 6.5" wrist. That gives me a ratio of 3.75, which should be too big according to your theory. I'd say the watch just about fits (no hanging lugs either). Judge for yourself.
(slightly blurry pic)
No problem, Im not saying you shouldn't have it. the fact that you just said it "just about fits" sits nicely with the system to me. Perhaps large pilots watches are supposed to be on the larger side of things. Having said that i just tried on an IWC pilot on a 7 inch wrist at about 40mm and it fitted like a glove to me.
Your formula is too simple and is missing several important criteria including: shape of lugs, lug-to-lug distance, height of the watch, how the strap/bracelet fits, shape of the case(round, square, rectangle, how the individual likes the look of the watch, etc.
i wanted t keep it relatively simple or else it becomes useless to most people. You are correct though, there are other factors you could consider if you really want a watch that fall out of the range.
Works well for me and I think it's a great formula for use as a general guide. For watches that come close to the upper or lower end of your range you'd need to consider the other factors such as lug to lug length, dial diameter, case shape and thickness etc. Perhaps some of these variables could be included in the equation (I'm no mathemetician!) but provided you have at least some experience in wearing different types of watches I think you can make your own conclusions regarding their influences.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
WatchUSeek Watch Forums
22.5M posts
575.5K members
Since 2005
A forum community dedicated to watch owners and enthusiasts. Come join the discussion about watch collections, displays, watch winders, accessories, classifieds, and more! We welcome all manufacturers including Casio G-Shock, OMEGA, Rolex, Breitling, Rolex and Tudor, Seiko, Grand Seiko and others.