WatchUSeek Watch Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
691 Posts
Discussion Starter #1
Does the Prodiver require a special caseback opener? The semicircular notches look like they require a special tool.
 

·
Registered
Joined
·
455 Posts
The case back is too height or the notches are too low, so my opener simply cannot reach. Stowa and others use a special machine for the job.
 

·
Registered
Joined
·
241 Posts
of the backwrench? its just a standard backwrench. it dosn't line up with all three teeth on the back but does with 2 and is sufficent to open and reseal the back.

cricket
 

·
Registered
Joined
·
241 Posts
not if your very careful, make sure you tighten the wrench to fit as well as you can and don't slip, if you do that no marks at all. the notches are very deep so you can get a good grip it helps if you have a watch vise too.

take it easy
cricket
 
1 - 9 of 9 Posts
Top