WatchUSeek Watch Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
Hi folks,

I thought I'd share a picture of my recently-purchased Seiko Bullhead. Runs excellent and resets perfectly. The only problem is the bezel is off by 180 degrees -- probably after replacing the crystal.

For those of you who have replaced bezels on these, is it a "simple" pry off, pop back on?

Thanks, and best to all for the New Year.

Ed B.
 

Attachments

·
Registered
Joined
·
619 Posts
Nice Bullhead Ed!
The bezel pops off by inserting a smooth case knife into the small notch on the underside of the bezel and gently prying it off. To reinstall it you'll need a crystal press with the correct size dies. It's best to line up the bezel and tape it in place before pressing it home.
 
1 - 2 of 2 Posts
Top