WatchUSeek Watch Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,143 Posts
If you don't have the tool then you can remove them easily with two pairs of tweezers. Use the (closed) tips with the tweezers diametrically opposite each other to turn it by pressing against the inside shoulders.

You can also refit them (carefully!) the same way, but that's a little bit more tricky because you have to depress the last "corner" into the recess at the same time as turning it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top