WatchUSeek Watch Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Hi Guys,

I recently bought a DW6900 CS-1. As i do not like the lettering on the bezel i have tried removing them with Evostick adhesive cleaner. This took forever and there are still small flecks of paint that won't budge. Could this be because the resin is gloss finish? I am thinking of buying the standard matt finish bezel and strap and trying again. Would the lettering come off easier or would i have the same problem? Thanks in advance.

Marelli
 

·
Registered
Joined
·
905 Posts
Hi Guys,

I recently bought a DW6900 CS-1. As i do not like the lettering on the bezel i have tried removing them with Evostick adhesive cleaner. This took forever and there are still small flecks of paint that won't budge. Could this be because the resin is gloss finish? I am thinking of buying the standard matt finish bezel and strap and trying again. Would the lettering come off easier or would i have the same problem? Thanks in advance.

Marelli
If you don't want to remove lettering, you could buy the bezel/band combo for the DW6900MS-1 from Casio USA.
 

·
Registered
Joined
·
2,962 Posts
I have a small can of automotive basecoat reducer that I use with a tooth brush. Takes it off quick and doesn't scuff it up. If you try this method, just make sure you wipe off any residue.
 
1 - 3 of 3 Posts
Top