Joined
·
2,921 Posts
FS: Sinn U2 Nov 2015 on Rubber
Asking $1525 net includes shipping (CONUS only)
Second owner. Bought this recently intending to use it as a ‘beater’ or ‘wear anywhere - do anything’ watch. But, as watch stories go, something else it ‘calling’.
This U2 has marks on the bezel, case, AR coating, and buckle but nothing major IMHO. This was not a safe queen. Though the AR coating has some central marks it and looks horrible in the picture, it doesn’t seem detract while on the wrist. I was going to remove the AR coating but think it’s really too minor of a distraction while wearing.
The timing was reset but not water tested. If you are going to do any real diving, I’d recommend getting it serviced and water tested. Timing is running about 0 to +1 sec/day on the wrist. Everything functions as it should.
Comes with boxes, booklet, warranty card, and Sinn tool. Rubber is cut but should accommodate wrist size up to 7.28”
I really prefer just to sell this but, if you must ask about a trade only a Sinn and preferably a diver please. Can trade even or up depending on what you’ve got.
Specs per web site:
Mechanical Movement
• ETA 2893-2
• Self-winding mechanism
• 21 bearing jewels
• 28,800 semi-oscillations per hour
• Seconds stop function
• Shock resistant as per DIN ISO 1413
• Anti-magnetic as per DIN 8309
Case
• Case made of German Submarine Steel, bead-blasted
• Sapphire crystal glass in front, anti-reflective on both sides
• Case back screw-fastened
• Crown screwable
• Meet the technical requirements for waterproofness, as set out in standard DIN 8310
• According to the technical demands for the diving norm DIN 8306
• Tested based on European diving equipment standards EN 250 / EN14143 and certified by DNV GL
• Low pressure resistant
Functions
• Hours, minutes, seconds
• Second time zone on a 24-hour basis
• Date display
• Diver's bezel with minute ratcheting and luminous key mark
SINN Technologies
• Bezel with TEGIMENT Technology, therefore especially scratch-resistant
• Captive bezel
• Ar-Dehumidifying Technology enhances functional reliability and freedom from fogging
• Temperature Resistance Technology, therefore functionally reliable at temperatures from -45°C up to +80°C
Dimensions and Weight
• Case diameter: 44 mm
• Band lug width: 22 mm
• Case thickness: 15.5 mm
• Weight without strap: 114 gramme
Dial and Hands
• Matte black dial
• Indices coated with luminescent colour
• Hour, minute and second hand coated with luminescent colour
• Mission timer design for optimal readability
Thanks for looking.
![Watch Brown Analog watch Clock Watch accessory]()
![Watch Analog watch Photograph Light Product]()
![Hood Automotive design Automotive exterior Audio equipment Gadget]()
![Gadget Rectangle Eyewear Automotive exterior Automotive design]()
![Wood Gas Fixture Tints and shades Cylinder]()
![Wood Gas Tints and shades Audio equipment Automotive lighting]()
![Watch Helmet Gadget Automotive lighting Personal protective equipment]()
![Material property Gadget Automotive lighting Tints and shades Electric blue]()
![Product Peripheral Gadget Material property Input device]()
![Watch Audio equipment Gadget Clock Material property]()
![Corded phone Gadget Communication Device Clock Audio equipment]()
![Watch Analog watch Watch accessory Clock Font]()
![Watch Analog watch Clock Watch accessory Gesture]()
![Watch Analog watch Clock Font Watch accessory]()
![Watch Analog watch Clock Font Wrist]()
![Gadget Measuring instrument Watch Gas Electronic device]()
![Watch Analog watch Clock Watch accessory Font]()
Asking $1525 net includes shipping (CONUS only)
Second owner. Bought this recently intending to use it as a ‘beater’ or ‘wear anywhere - do anything’ watch. But, as watch stories go, something else it ‘calling’.
This U2 has marks on the bezel, case, AR coating, and buckle but nothing major IMHO. This was not a safe queen. Though the AR coating has some central marks it and looks horrible in the picture, it doesn’t seem detract while on the wrist. I was going to remove the AR coating but think it’s really too minor of a distraction while wearing.
The timing was reset but not water tested. If you are going to do any real diving, I’d recommend getting it serviced and water tested. Timing is running about 0 to +1 sec/day on the wrist. Everything functions as it should.
Comes with boxes, booklet, warranty card, and Sinn tool. Rubber is cut but should accommodate wrist size up to 7.28”
I really prefer just to sell this but, if you must ask about a trade only a Sinn and preferably a diver please. Can trade even or up depending on what you’ve got.
Specs per web site:
Mechanical Movement
• ETA 2893-2
• Self-winding mechanism
• 21 bearing jewels
• 28,800 semi-oscillations per hour
• Seconds stop function
• Shock resistant as per DIN ISO 1413
• Anti-magnetic as per DIN 8309
Case
• Case made of German Submarine Steel, bead-blasted
• Sapphire crystal glass in front, anti-reflective on both sides
• Case back screw-fastened
• Crown screwable
• Meet the technical requirements for waterproofness, as set out in standard DIN 8310
• According to the technical demands for the diving norm DIN 8306
• Tested based on European diving equipment standards EN 250 / EN14143 and certified by DNV GL
• Low pressure resistant
Functions
• Hours, minutes, seconds
• Second time zone on a 24-hour basis
• Date display
• Diver's bezel with minute ratcheting and luminous key mark
SINN Technologies
• Bezel with TEGIMENT Technology, therefore especially scratch-resistant
• Captive bezel
• Ar-Dehumidifying Technology enhances functional reliability and freedom from fogging
• Temperature Resistance Technology, therefore functionally reliable at temperatures from -45°C up to +80°C
Dimensions and Weight
• Case diameter: 44 mm
• Band lug width: 22 mm
• Case thickness: 15.5 mm
• Weight without strap: 114 gramme
Dial and Hands
• Matte black dial
• Indices coated with luminescent colour
• Hour, minute and second hand coated with luminescent colour
• Mission timer design for optimal readability
Thanks for looking.
