WatchUSeek Watch Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter · #1 · (Edited)
WUS,
I've been told that my watches must go... (I made a very large purchase without consulting my wife...)

The Marathon CSAR was my grail for years and I finally caught one about a year and a half ago here on WUS. It was in brand new condition when I received it and has since been modified by MCWW (white on black day/date, AR coated, adjusted). I've worn this watch sparingly, but when I did wear it I did so as a tool watch. There are a few small blemishes here and there, but nothing major and/or noticeable.

The watch will come with everything in the pictures (box, manual, bracelet, rubber strap).

I am asking $1750 SOLD paypal'd and shipped overnight via FedEx within CONUS.

I'm sorry but I cannot accommodate overseas/international shipments/sales.

The fastest way to contact me is via gmail - tedmcdavitt at gmail.com. I'll do my best to reply quickly. Thanks.

Here are the specs from the manufacturer (marathonwatch.com) for this watch in case you are not completely familiar with it:
This chronograph has chronograph timing capabilities but can also be used as a Dive Watch.

Movement is 7750 ETA Valjoux Automatic (Self Winding) 25 jewel minimum Swiss Made Movement. Movement has "Date & Day" display with "Rapid Date and Day Correction". Chronograph has 1/5 second (100[SUP]th[/SUP] minute) timing. Movement is non-magnetic and has minimum 36 hour running time.

Case construction allows for 300M/1000ft water resistance by using Screw-Down Crown and Screw-Down Side pushers. Revolving external bezel is calibrated from 0 to 60 in white on black background. Case diameter is 44.5mm and high turning bezel is 46.6mm. Case is made of 316L Stainless Steel and has a sapphire crystal.

Dial display shows standard and supplemental time 1 - 12 (13 - 24); also, dial displays Date and Day. Chronograph timing is dual graduated, inner graduations are 1/5 sec and as well as decimal 1/100minute timing (alternate inner timing ring). Sweep Second hand indicates timing in 1/5 sec (&/or 1/100 minute) up to 60 sec (1 minute); Chronograph sub registers measure up to 30 minutes and 12 hours each. Register indexes & hands use MARAGLO paint for night viewing. Encapsulated tritium (Isotope H3) light sources are used for dial at each hour position as well as the Minute and Hour hands, activity between 28-30 millicuries (under 30 millicuries).

This Chronograph meets the specifications of both NSN 6645-01-544-0408 and NSN 6645-20-002-8253

Chronograph timing:
· 1/5 second and 1/100[SUP]th[/SUP] minute timing divisions
· Time-out 2 button function: with independent start/stop and zero reset buttons
· 0 to 30 minutes (30 minute register at 12 o'clock position)
· Small sweep second (at 9 o'clock position)
· 0 to 12 hours (12 hour register at 6 o'clock position)

This watch comes complete with 100% vulcanized black rubber strap 22mm wide and 316L stainless steel buckle. Engraved markings on back include details such as date of production and serial numbers for traceability and maintenance.












BTW: the purchase that I made was a Piper Cherokee 160... Try hiding one of those from your wife ;-)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top