WatchUSeek Watch Forums banner

PTS-Resources 2650 caliber Standard movements

1 reading
29K views 4 replies 4 participants last post by  nderwater  
#1 · (Edited)
Here is my interpretation of the 2650 Standard movements in the 2009/2010 PTS Resources catalog. All of these are 27.00mm in diameter. The mechanicals are 4.30/4.375mm in height and the automatics are 6.53mm in height.

In summary, the movement has 17 jewels or 19 jewels for small seconds. And the automatics have a 3 jewel winding module added. Now if we could just figure out which models are made by Liaocheng or Liaoning? Or someone else?

2650S = 17 jewel, 3-hand skeleton, gold, mechanical
(S=skeleton)
2650SS = 17 jewel, 3-hand skeleton, silver tone, mechanical
(SS=skeleton, silver tone)

2650SZ = 20 jewel, 3-hand skeleton, gold, automatic
(SZ=skeleton, automatic)
2650SSZ = 20 jewel, 3-hand skeleton, silver tone, automatic
(SSZ=skeleton, silver tone, automatic)

These movements are listed as being PNP plated (silver tone) or gold plated with decoration.

2650SX = 19 jewel, 3-hand, small seconds, skeleton, gold, mechanical
(SX=skeleton, small seconds)
2650SSX = 19 jewel, 3-hand, small seconds, skeleton, PNP, mechanical
(SSX=skeleton, PNP, small seconds)

2650SZX = 22 jewel, 3-hand, small seconds, skeleton, gold, automatic
(SZX=skeleton, automatic, small seconds)
2650SSZX = 22 jewel, 3-hand, small seconds, skeleton, PNP, automatic
(SSZX=skeleton, PNP, automatic, small seconds)

2650SJ = 17 jewel, 3-hand, skeleton, gold, mechanical
(SJ=skeleton, decorative finishing)
2650SSJ = 17 jewel, 3-hand, skeleton, PNP, mechanical
(SSJ=skeleton, PNP, decorative finishing)

Note, it is mentioned in the wiki that the 2560SZ & 2560SSZ are listed as having a different jewel count in the 2008/2009 catalog (33 jewels) than in the 2009/2010 catalog (20 jewels). It makes sense that it would have 20 jewels, and I believe the 2008/2009 catalog is in error.

Image


Cheers,
gigfy
 

Attachments

#2 ·
Re: PTS-Resources Standard movements

Don't forget the 32.8mm Liaocheng G-series (G3201, G3202, G3201Z, G3202Z) with oversized main plate and redesigned set-lever. The Z (zidong?) suffix denotes the new Magic-Lever auto-winding module.
 
#4 ·
Re: PTS-Resources Standard movements

Don't forget the 32.8mm Liaocheng G-series (G3201, G3202, G3201Z, G3202Z) with oversized main plate and redesigned set-lever. The Z (zidong?) suffix denotes the new Magic-Lever auto-winding module.
Quite right! :-! I mainly focused on the 2650 caliber. I had narrowed that one down as the Stuhrling Original ST-90050. :)

I guess I should rename the thread to just include the 2650 Standard movements.

Cheers,
gigfy
 
#3 ·
Re: PTS-Resources Standard movements

If anyone is wondering, the plated movements only cost $1 or 2 more than the non plated ones which cost $4.
2650SJ / 2650SSJ 27.00MM 4.30MM 17
2650SZX / 2650SSZX 27.00MM 6.53MM 22
2650SX / 2650SSX 27.00MM 4.375MM 19
2650S / 2650SS 27.00MM 4.375MM 17